I swore rapid peck drilling was fine for deep holes until I snapped a tap in a $900 block
Last month I was running a batch of 4140 blocks on the old Haas and tried to speed things up by cranking the peck depth way down on a 6 inch deep 1/2-13 tap. The tap grabbed and snapped off about 4 inches in, and I stood there in front of the machine at 2 in the morning smelling coolant and feeling sick. I tried an extractor for an hour, then ended up spark eroding the thing out over the weekend, which ate my whole Saturday. Now I run way more shallow pecks and slow the spindle down for anything past 2 inches deep. What feed and peck numbers are you all running on deep taps in 4140, because I'm still second guessing mine.